What are the precautions when install and debug the CNC bending machine mold

  • 2020-12-01 13:18:18

What are the precautions when install and debug the CNC bending machine mold

The CNC bending machine mold is composed of many parts, so you must check the status of the equipment when installing, and follow the steps strictly, and pay attention to safety when installing and debugging

CNC Press Brake Machines manufacturer

installation and debugging process of CNC bending machine mold:

1. adjustment of the machine

before installation, you must adjust the performance of the machine firstly. This process must be carried out patiently and carefully. check whether the machine has dust or used iron chips, etc., and perform necessary cleaning to reduce later troubles.

2. adjustment of slider stroke

pay attention to check the thickness of the mold and check whether the ratio of the upper and lower modules is normal. Normally, the module should be controlled at the switch point of the stroke line. This must be paid attention to.

3. adjustment of the stroke module

That is to adjust the upper limit point of the module. When the module is up to the highest point, set the switch and reserve the stop position of the slider. at the same time, the deceleration module should be used when going down, which can protect the machines and molds better.

CNC Press Brake Machines manufacturer

4. adjustment of gap

it is mainly to measure the distance between the upper module and the lower module first. The specific gap setting is determined according to the folded plate.

5. angle adjustment

The adjustment of this angle has a certain relationship with the product. generally speaking, when folding a 90° mold, the middle angle must be greater than the angle of the two sides. then its tightness can be carried out according to the adjustment screw. When bending, pressure can be adjust by the pressure gauge, which can avoid the die chipping.

product details: metal bending machine

حقوق النشر © 2015-2021 Anhui Aoxuan Heavy Industry Machine Co.,Ltd.كل الحقوق محفوظة.


اترك رسالة

اترك رسالة

    إذا كنت مهتمًا بمنتجاتنا ، فالرجاء ترك رسالة هنا ، وسوف تعرف المزيد من التفاصيل.